11
3.2 Unit Status
Camera:
Indicates if the camera data connection is good. If the state reported is disconnected,
the most likely cause is the wrong camera type or manufacturer is selected.
Data RX:
Indicates if the data received is valid. Used in conjunction with the data RX LED on the
base of the unit data communication problems can be diagnosed.
The LED indicates the
radio modem has received a carrier, but does not indicate the presence of valid data. If
the LED is flashing, but the Data RX on the display indicates ERROR, this can mean that
either the camera ID is set incorrectly or there is no valid data for the ID currently
selected.
Or it can mean the RF signal is being interfered with.
Camera ID:
Will indicates the current Camera ID. This relates to the port the user has selected on
the IDU to control the camera in question.
Tally:
Indicates when a tally signal has been received from the RCP-TX-IDU
Neither
Red
Green
Both
Camera Connected
Data Rx - OK
Camera 2
Tally: Neither
