Page 10
Black 1/4” Tube Connection - Inlet Water
Step 15
Insert the other open end of the black 1/4” tube into the open 1/4”
quick connect fitting on the plastic adapt-a-valve making sure the
tube is pushed in all the way to the tube stop.
Step 16
Black Tube
Adapt-a-Valve
In the parts bag, locate the 1/4” black tube. Connect the tube to
the quick connect fitting on the left side of the RO Module labeled
“In” making sure the tube is pushed in all the way to the tube stop.
Thread the plastic valve onto the tank fitting.
Do not over tighten
or the valve could crack.
Step 17
Step 18
Teflon tape must be applied in a clockwise direction. Wrap 5 to 7
turns around the male pipe threads (MPT) on the Stainless Steel
fitting on top of the tank.
Tank Valve Installation - Metal Tank
Tank Valve Installation - Plastic Tank
Thread the plastic valve onto the tank fitting.
Do not over tighten
or the valve could crack.
Step 19
Step 20
Make sure the O-ring is located at the bottom of the recess for
the tank connection.
DO NOT use Teflon tape on plastic tank.
Note:
