background image

10

8. Directives

Designation

Description

Link

Low Voltage Directive (LVD)

The Low Voltage Directive (LVD) (2014/35/EU) ensures that 
electrical equipment within certain voltage limits provides a high 
level of protection for European citizens, and benefits fully from 
the Single Market.

2014/35/UE

Electromagnetic Compatibility (EMC)
Directive 2014/30/EU

The Electromagnetic Compatibility (EMC) Directive 2014/30/EU 
ensures that electrical and electronic equipment does not 
generate, or is not affected by, electromagnetic disturbance.

2014/30/UE

Restriction of the use of certain 
hazardous substances Directive (RoHS) 
2011/65/EU

Directive on the restriction of the use of certain hazardous 
substances in electrical and electronic equipment.

2011/65/EU

Waste Electrical & Electronic Equipment
Directive (WEEE)

The WEEE Directive (2012/19/EU) aims to reduce the amount of 
waste electrical and electronic equipment that ends up in landfill.

2012/1
9/EU

Ecodesign Commission Regulation

Ecodesign requirements for local space heaters.

2015/1188

Radio Equipment Directive (RED) 
2014/53/EU

The Radio Equipment Directive 2014/53/EU (RED) establishes a 
regulatory framework for placing radio equipment on the market.

2014/53/EU

Содержание WFC-03 HCM RF 230












Отзывы: