12
5.2 System configuration with central unit
The central unit centralizes the communication between controllers.
Device 1: Main Controller
Device 2: Sub-controller
Remarks
First, all ratio thermostats must be paired with the respective WFC-03 HC RF controller! See 5.1.1
By pressing
for 5 seconds, the
controller goes in RF pairing menu.
By using
and
select zone 3
(Red blinking led), press
to enter in
Pairing with a slave device mode.
All LEDs are blinking green.
By pressing
for 5 seconds, the
controller goes in RF pairing menu.
By using
and
select zone 2
(Red led), press
to enter in Pairing
with a master device mode.
All LEDs are blinking red.
When RF pairing is done, both
WFC-03 HC RF return to pairing mode.
Exit of the controller pairing menu: Long
press on
.
Device 1: WFC-03 HC RF
Device 2: BT-CT02 RF
Remarks
First, all ratio thermostats must be paired with the respective WFC-03 HC RF controller! See 5.1.1
By pressing
for 5 seconds, the
controller goes in RF pairing menu.
By using
and
select zone 2
(Red blinking led), press
to enter in
Pairing with a master device mode.
All LEDs are blinking red.
Put the device in RF pairing mode.
Select the first room.
When RF pairing is done, both
WFC-03 HC RF and BT-CT02 RF
exits the pairing mode.
Exit of the controller pairing menu: Long
press on
.
BT-D03 RF
WFC-03 HC RF
WFC-03 HC RF
WFC-03 HC RF
WFC-03 HC RF
BT-WR02 RF
(Option)
WFC-03 HCM RF 230 (Option)
BT-A03 RF
BT-CT02 RF
