manualshive.com logo in svg
background image

20

Description

INTERNET UNAVAILABLE

The thermostat has a WiFi connection to the router but is unable to communicate 

to the Internet. Steps to clear the error include: 1) power off and on the router, 2) 

power off and on the thermostat. 

MEMORY ERROR

The thermostat memory settings are corrupted. To clear, load the factory defaults 

in the Toolbox menu. The thermostat will not operate any heating equipment while 

this error message is present.

INTERNAL ROOM SENSOR FAULT

Due to an open or short circuit, the thermostat is unable to read the internal 

room temperature sensor. If sensor 1 or 2 is set to room the thermostat continues 

to operate, otherwise operation stops. 
The error cannot be field repaired. Contact your Watts sales representative for 

warranty or repair procedures.

SENSOR 1 FAULT

Due to an open or short circuit, the thermostat is unable to read the sensor wired 

to S1 and Com. The thermostat stops normal operation if sensor 1 is the only 

active room or floor sensor or if a floor maximum temperature has been set.
Check the auxiliary sensor wire for short circuits according to the sensor in-

stallation manual. It may be necessary to replace the auxiliary sensor. Once the 

error has been corrected, the error message automatically clears.

SENSOR 2 FAULT

Due to an open or short circuit, the thermostat is unable to read the sensor 

wired to S2 and Com. The thermostat stops normal operation if sensor 2 is the 

only active room or floor sensor or if a floor maximum temperature has been set.
Check the auxiliary sensor wire for short circuits according to the sensor  

installation manual. It may be necessary to replace the auxiliary sensor. Once 

the error has been corrected, the error message automatically clears.

ROOM HOT WARNING

The room temperature is above the Room Hot Warning setting in the Alerts 

menu. The warning will automatically clear once the room temperature falls 

below the setting. 

ROOM COLD WARNING

The room temperature is below the Room Cold Warning setting in the Alerts 

menu. The warning will automatically clear once the room temperature rises 

above the setting. 

When an error occurs an email notification will be sent to the registered Watts 

Home mobile or account owner.

Error Messages

Содержание W561

























Отзывы: