3 of 4
© 203 Watts Radiant
Setting The Temperature
To change the heat temperature setting, push the
or
buttons to select a
preferred temperature setting.
air Temperature Only
-----------------------------------------------
If there is only an air temperature sensor (no floor sensor), the thermostat operates
to control your desired air temperature.
Floor Temperature Only
--------------------------------------------
If the air sensor has been disabled, the thermostat will only maintain floor temperature
and ignore air temperature. This operation is recommended for areas such as
bathrooms to ensure that tile floors are warm to the touch.
Floor and air Temperature
-----------------------------------------
If the air sensor is turned on and a floor sensor is connected, the thermostat will
maintain your desired air temperature as well as a minimum floor temperature.
This operation is recommended for areas with large windows that allow the sun to
shine into a room and keep it warm without the need for heat. This can allow the
floors to cool off during the afternoon. When the sun goes down, it can take a long
time for the floors to get warm again. This may cause the room to cool off too much in
the early evening. A floor minimum setting can help with this condition by maintaining
a floor minimum temperature. Keep in mind the floor minimum temperature will
override the air temperature, and if set too high, may overheat the room.
This operation is also recommended for rooms with hardwood floors. Setting floor
minimum and maximum temperatures is a way of enhancing the comfort of your
living space while protecting your floor coverings.
90°F (32°C)
Feels hot to the touch
80 to 85°F (26 to 30°C)
Feels warm to the touch
70°F (2°C)
Feels cool to the touch
40 to 45°F (5 to 7°C)
Feels cold to the touch
Suggested maximum for all floor
types other than wood.
Bathrooms and kitchens. Suggested
maximum for wood floors.
Rooms with large windows preventing
under heating in the evening.
Freeze protection for garages.
