background image

PROGRAMMABLE

THERMOSTAT

BY HONEYWELL

PROGRAMMING AND INSTALLATION
INSTRUCTIONS

Weekday/Weekend (5-day/2-day)

Programmable Heat and/or Cool

Low Voltage (20 to 30 Vat)

Thermostat and Mounting Plate

Model 

Limited One-Year Warranty

Honeywell warrants this 

 excluding battery, to be free from defects in the workmanship or materials, under normal use and 

for a 

 of one (1) year from the date of purchase by tha consumer. If, at any lime during the warranty period, the product is defective or

malfunctions, Honeywell shall repair or replace it (at 

 option) within a reasonable period of time.

 the product is defective,

(i) 

   with a bill of 

 

 dated 

 of purchase, to the retailer from which you purchased it, or

(ii) package it carefully, 

 

 Proof of purchase (including date of 

 and a short description of the

ma 

 ion, and mail it, postage prepaid, to the following address

 Inc.

in Canada: Honeywell Limited/Honeywell 

Return Goods Department

Product Services ON 15-FFE

1050 

 Lane

74o 

 Road

Plymouth, MN 55441-4437

Scarborough, Ontario Ml P 2V9

This warranty does not cover removal or reinstallation coats. This warranty shall not 

 if   is shown by Honeywell that the defect or

malfunction was caused by damage 

 occurred 

 the product was in the possession of a consumer.

Honeywell’s sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE
FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY
OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT.
Some states do not allow the exclusion or limitation of incidental 

 consequential damages, so 

 limitation may not apply to you.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED
wARRANTIES, INCLUDING THE WARRANTIES OF 

 AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY

LIMITED TO THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not allow 

 on how long an implied warranty lasts,

so the above limitation may not apply to you.

This warranty 

 you specific legal rights, and You may have other 

 

 vary from state to state.

 you have any questions concerning this warranty, please write our Customer Assistance Center, Honeywell Inc., 

 Box 524, Minneapolis,

MN 55440-0524 or call 1-800-468-1502, Monday-Friday, 

 a.m. to 

 p.m., Central time. In Canada, write Retail Products ON1 5-02H,

Honeywell 

 

 740 

 Road, Scarborough, Ontario Ml P 2V9.

35

TYPICAL ENERGY SAVINGS FOR REPRESENTATIVE CITIES IN THE U.S. AND CANADA

❑ 

 for 

❑ 

 

 

 

 

Q

   

 

 

 

 

Thermostat patents pending.

 

 55 

   

 savings.) 

Printed in U.S.A. 

 7-93 

 Inc. 1993

Содержание MagicStat CT2400















Отзывы: