Watts Hydro-Force LFFRRV-H-C, Руководство по установке

Страница: 3 / 12

Typical Mounting Instructions For Workboard Faucets
For additional information on replacements parts,
please visit our website: foodservice.watts.com
GENERAL INSTRUCTIONS:
Most faucets are supplied with mounting hardware,
including ½" nipples. For installation instructions, we
will assume that hot and cold water supplies end in ½"
nipples. We recommend using a 1
1
/
4
" hole in the deck
or backsplash to accommodate the ½" supply nipples.
1. Turn off water supply at main source.
2. Hand-tighten all parts prior to tightening with wrench.
3. Do not force parts together.
4. All plated surfaces should be handled with care;
avoid scratching with tools.
5. Dimensions shown are for reference only and not to be
used for pre-plumbing.
6. Use teflon tape or pipe joint compound when making
threaded connections to water supply lines.
INSTALLATION INSTRUCTIONS:
1. Rigid Spout: Thread into opening on faucet body
and tighten spout into body. Swivel Spout: Push
swivel spout into threaded opening on faucet body
and tighten spout nut to body.
2. Using plumber’s putty, run a thick bead of putty on
the underside of faucet body around perimeter
and shanks.
3. Deck Mount: Insert faucet body into mounting
holes in deck. Back Splash: Insert faucet body
into backsplash.
4. Using mounting kit provided, tighten faucet shanks
to deck or backsplash and scrape excess putty away
from body. Install mounting hardware in the following
order: rubber washer, metal lock washer, lock nut.
5. Connect water supply line to faucet shanks.
6. Turn on water supply and check for leaks.
FAUCET BODY
1/2” NPSM
MOUNTING KIT:
WASHER
LOCKING WASHER
LOCKING NUT
SPOUT NUT
MOUNTING KIT:
WASHER
LOCKING WASHER
LOCKING NUT
1/2” NPSM COUPLING NUT & SEAL
FOR 1/2” RIGID OR FLEXIBLE RISER
SPOUT NUT
FAUCET BODY
WARNING
!
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information can result in death,
serious personal injury, property damage, or damage to the equipment.
Keep this Manual for future reference.