Watts Hydro-Force LFFRRV-H-C, Руководство по установке

Страница: 2 / 12

Watts Hydro-Force™ Economy Foodservice
Plumbing Products Installation Instructions
REPLACEMENT CARTRIDGE
HOT VALVE ASSEMBLY
MODEL LFFRRV-H-C
REPLACEMENT CARTRIDGE
COLD VALVE ASSEMBLY
MODEL LFFRRV-H-C
For additional information on replacement parts
please visit our website: foodservice.watts.com
PRE-RINSE REPLACEMENT HOSE WITH GRIP
MODEL LFPRH-GXX
PRE-RINSE BUTTON VALVE ASSEMBLY
MODEL LFPRSH-BV
FAUCET BODY
TIGHTEN LOCKNUT
AGAINST DECK
WASHER
LOCKNUT
YOKE
3
/
8
"
TAILPIECE
1
/
2
" WATER SUPPLY
LINE/NIPPLE
FAUCET BODY
SINK/BACKSPLASH
TIGHTEN
FLANGE AGAINST
SINK/BACKSPLASH
1 /
2
" WATER SUPPLY
LINE/NIPPLE
WASHER
FLANGE
TIGHTEN
COUPLING NUT
FAUCET BODY
TIGHTEN FLANGE
AGAINST DECK
1 /
2
" WATER SUPPLY
LINE/NIPPLE
MOUNTING KIT INCLUDES:
Rubber Washer, Steel Washers, Flange, Nipple and Locknut
*SHOWN WITH OPTIONAL 90˚
MOUNTING KIT NO. LFFRMK-W
FAUCET BODY
SINK/BACKSPLASH
WASHER
1
/
2
" WATER SUPPLY
LINE/90˚ NIPPLE MTG. KIT*
TIGHTEN FLANGE
AGAINST SINK/
BACKSPLASH
TIGHTEN
COUPLING NUT
1
2 FLANGE
GENERAL INSTRUCTIONS:
Most faucets are supplied with mounting hardware, including ½" nipples. For
installation instructions, we will assume that hot and cold water supplies end
in ½" nipples. We recommend using a 1-1/4" hole in the deck or backsplash
to accommodate the ½" supply nipples.
1. Turn off water supply at main source.
2. Hand-tighten all parts prior to tightening with wrench.
3. Do not force parts together.
4. All plated surfaces should be handled with care; avoid scratching with tools.
5. Use Teflon tape or pipe joint compound when making threaded connections
to water supply lines.
ASSEMBLE COUPLING TO SINK DECK
Apply Teflon tape or pipe joint compound to the supply line nipples. Place
nipple through holes in deck. Assemble flange of each coupling to one
nipple, then the other. Thread flange loosely against wall or backsplash.
ASSEMBLE FAUCET TO COUPLINGS
Carefully orient, mount and hand tighten the faucet to the two couplings.
Be sure to include the washers provided. Use wrench to hand-tighten
flange against wall or backsplash. Maintain alignment of faucet to sink while
tightening. Now wrench-tighten couplings to faucet body, then tighten flange
against sink/backsplash.
Watts Hydro-Force Economy
is available exclusively from:
Dormont Manufacturing
6015 Enterprise Drive
Export, PA 15632
Tel: (800) 367-6668
foodservice.watts.com
AVAILABLE PARTS INCLUDE:
DECK MOUNT WALL MOUNT DOUBLE PANTRY
SINGLE PANTRY
WARNING
!
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information can result in death,
serious personal injury, property damage, or damage to the equipment.
Keep this Manual for future reference.