Page 10 of 18
Plumb to Drain
If the HS-Series was ordered with the atmospheric storage tank, the three
tank float switches
have been installed at the factory. Check to insure the tank floats have not been damaged.
1. Connect the gray electrical cable containing four (4) wires from the M-Series control box
to the corresponding electrical connection on the atmospheric tank.
2. Connect the gray electrical cable from Control Box, labeled “By-Pass Solenoid”
to the By-Pass Solenoid.
3. Connect the gray electrical cable from Control Box, labeled “By-Pass Float
Switch” the By-Pass Float Switch.
4. Using the table below connect the RO processor Bulkhead to the tank using
specified tubing or PVC pipe.
HS-450
HS-1000
HS-2400
HS-4800
HS-9600-
HS15,000
Bulkhead
Connection
1/2” Poly
1/2” Poly
1/2” Poly
½” PVC
1” PVC
Drain Size Min.
1 ¼”
1 ¼”
1 ¼’
1 ¼’
1 ¼”
Drain Connection
