7
•
You will hear the sensor’s audible alert.
•
The light on the top of the sensor will blink red and green.
•
The display screen on the H2iQ E800 will indicate a leak, and the system will
shut off the water.
To silence the audible alert, do one of the following:
•
Press the button on the top of the sensor.
•
Remove the sensor from the water. It will clear the water leak state and also
silence the audible alert.
•
Use the touch screen on the H2iQ E800 to reset the sensor and clear the alarm.
The procedure is described below.
On the H2iQ E800 display, select
Leak Sensor
to see which sensor has
detected a leak. The leak will be identified by a red circle and red text.
After the leak is resolved, select
Reset Sensor
to begin monitoring again.
If no action is taken after 5 minutes, the screen will enter sleep mode. When
activated, the following leak alert will be shown on the screen until cleared in
Alerts (select the gear icon in the upper right corner).