![background image](http://html1.mh-extra.com/html/watts/aerco-inn-1060n/aerco-inn-1060n_installation-operation-and-maintenance-manual_877211041.webp)
Innovation - Edge [i] Installation, Operation, Maintenance Manual
CHAPTER 3
– OPERATION
OMM-0143_A
• GF
-216
•
9/6/2019
Technical Support
•
(800) 526-0288
•
Mon-Fri, 8 am - 5 pm EST Page 41 of 170
Spark Monitor
Enabled/Disabled
Enables/Disables the Spark Monitor.
Min Spark
Numeric Entry
Minimum spark. (0.00 to 0.29 amps)
Max Spark
Numeric Entry
Maximum spark. (0.30 to 2.50 amps)
3.3.2.3
Main Menu
→
Calibration
→
Combustion Summary
Main Menu
→
Calibration
→
Combustion Summary
Valve Position
Read Only
Displays combustion calibration valve steps.
O2
Read Only
Displays combustion calibration O2 results.
NOx
Read Only
Displays combustion calibration NOx results.
CO
Read Only
Displays combustion calibration CO results.
Flame Strength
Read Only
Displays combustion calibration flame strength.
3.3.3 Diagnostics Menu
The Diagnostics menu contains the following sections:
3.3.3.1
Main Menu
→
Diagnostics
→
Manual Run
Main Menu
→
Diagnostics
→
Manual Run
Manual Mode
Enable/Disable
Enables/disables running in Manual Mode.
Fire Rate
Adjust
Manual fire rate adjustment, 0 to 100%
O2
Read Only
The percentage of O
2
in the unit’s exhaust
Flame Strength
Read Only
The flame strength sensed in the burner, 0 to 100%
3.3.3.2
Main Menu
→
Diagnostics
→
Front Panel
Main Menu
→
Diagnostics
→
Front Panel
Touchscreen Display Test
On/Off
Starts the Touchscreen Display Test.
Touchscreen Test
On/Off
Starts the Touchscreen Test.
Status Light Test
On/Off
Starts the Status Light Test.
Keypad and Switch Test
On/Off
Starts the Keypad and Switch Test.
3.3.3.3
Main Menu
→
Diagnostics
→
Analog Outputs and Relays
Main Menu
→
Diagnostics
→
Analog Outputs and Relays
→
Relays
Ignition Relay
Enable/Disable
Enables/Disables the Ignition Relay.
Blower Relay
Enable/Disable
Enables/Disables the Blower Relay.
Pump Relay
Enable/Disable
Enables/Disables the Pump Relay.
Aux Relay
Enable/Disable
Enables/Disables the Aux Relay.
Fault Relay
Enable/Disable
Enables/Disables the Fault Relay.
Main Menu
→
Diagnostics
→
Analog Outputs and Relays
→
Analog Outputs
Valve
Read/Adjust
Adjustable display of the A/F valve Position .
Blower
Read/Adjust
Adjustable display of the Blower.