background image

ServiceGuide-ACV-Assure

Field Installation and Service Guide

For Authorized Installers Only

ACV Assure™

AA-MFP-ACV

This Field Installation and Service Guide is intended to be a tool 

for Authorized Installers to use in the installation and commission-

ing of the ACV Assure™ system. As part of the installation and 

commissioning processing, Authorized Installers are expected to 

be familiar with all components of the ACV Assure system and  

complete the necessary pre-work to achieve a successful  

installation. This includes:
•  Completing the ACV Assure Qualification Check List and ACV 

Assure Site Survey;

•  Performing pre-installation mechanical fabrication and wiring;
•  Familiarizing themselves with various other installation require-

ments, including on-site construction and hardware mounting, 

sensor and plumbing fitting, ACV Assure electric wiring, ACV 

Assure retrofits with a solenoid valve;

•  Commissioning the hardware and Syncta

®

 dashboard for the 

ACV Assure

Table of Contents

Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . 2
List of Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Applications (Typical) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–4
Control Box and Cellular Gateway Installation  . . . . . . . . . . . . . 5
Component Installation Details  . . . . . . . . . . . . . . . . . . . . . . . . 6
Supplied Snubber Installation for the Pressure Sensor  . . . . . . 6
Watertight Splice for the Pressure Transducer . . . . . . . . . . . . . 7
Common Application Wiring Diagrams  . . . . . . . . . . . . . . . 8–10
Installation and Set-Up  . . . . . . . . . . . . . . . . . . . . . . . . . . 11–12
  Installing the Cellular Gateway  . . . . . . . . . . . . . . . . . . . . . 11
  Setting Up the Cellular Gateway . . . . . . . . . . . . . . . . . . . . 11
  Startup Sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Troubleshooting Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . 15–16
Installing Covers on Cellular Gateway and Control Box . . . . . 17
Registering ACV Assure and Other Assets  . . . . . . . . . . . . . . 18
Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

NOTICE

Use of the ACV Assure™ Monitoring System Manual does 

not replace the need to comply with all required instructions, 

codes, and regulations related to the installation, operation, and 

maintenance of an Automatic Control Valve (ACV), including the 

standard observance and monitoring of water conditions. 
Watts is not responsible for the failure of alerts due to 

connectivity or power issues.

Flow 

Switch

Control Box

Cellular 

Gateway

Pressure 

Sensor

Read this Guide BEFORE using this equipment.
Failure to read and follow all safety and use information 

can result in death, serious personal injury, property 

damage, or damage to the equipment.
Keep this Guide for future reference.

WARNING

!

Содержание ACV Assure





















Отзывы: