Watts Premier Sof-Tek, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 36

How To Get The Maximum Effi ciency From Your Appliance
1. Fill salt cabinet when water level is above salt level. DO NOT MIX DIFFERENT TYPES OF
SALT . If iron is present in your water, use a salt with an iron-cleaning additive to help keep
the resin clean. You may also use a resin cleaner on a monthly basis in place of salt with
cleaning additives. If iron is not present in your water, a clean pellet, solar or cube type salt is
recommended. The use of rock salt is not recommended because it contains impurities that
may clog the injector assembly.
2. You may use a salt substitute (such as potassium chloride) in place of water conditioner
salt. If you start with water conditioner salt, you can switch to a salt substitute at any time -
or vice versa.
If potassium chloride is used in place of nugget or pellet salt, you must
select the potassium option during the programming of the controller. We do not recommend
using Potassium Chloride if there is iron in your water.
3. Should your electricity be turned off for any reason you must reset time of day.
(See page 12)
4. Protect your appliance from freezing, including drain line.
5. By-pass the appliance when servicing the well, plumbing, or pump. When work is completed,
turn on the nearest cold water tap until water runs clear before putting appliance back in
service. See fi gures 4 - 5 - 6.
5