background image

Limited Warranty

Warranty Information

To place this appliance under limited warranty, the limited warranty registration card
must be completed and returned within 30 days of installation.

Coverage

 - This limited warranty covers the appliance delivered to the original 

owner when the system is purchased for personal, family, or household use. It is 
intended to cover defects occurring in workmanship or material or both.

Warrantor’s Performance and Length of Limited warranty

 - 

warrants that upon receipt 

from the original owner of any mechanical or electronic part which is found to be defective in material or workmanship, 
warrantor will repair or replace the defective item for 3 years from date of installation.

Warrantor further warrants that upon receipt from the original owner of any media tank/valve body, brine cabinet, found 
to be defective in material or workmanship, warrantor will repair or replace the defective item for 10 years from date of 
original installation.

There are no warranties other than those described in this limited warranty instrument.

This limited warranty does not cover any service call or labor costs incurred with respect to the removal and replace-
ment of any defective part or parts.

Warrantor will not be liable for, nor will it pay service call or labor charges incurred or expended with respect to this 
limited warranty.

In the event the water supply being processed through this product contains bacterial iron, algae, sulphur, tannins, or-
ganic matter, or other unusual substances, then, unless the softener is represented as being capable of treating these 
substances in the softener specifi cations, other additional treatment of the water supply must be used to remove these 
substances before they enter this product. Otherwise, warrantor shall have no obligations under this limited warranty.

This limited warranty does not cover damage to a part or parts of the appliance from causes such as fi re, accidents, 
freezing, or unreasonable use, abuse, or neglect by the original owner. 

This limited warranty does not cover damage to a part or parts of the appliance resulting from improper installation. All 
plumbing and electrical connections should be made in accordance with all local codes and the installation instructions 
provided with the appliance. The limited warranty does not cover damage resulting from use with inadequate or defec-
tive plumbing inadequate or defective house wiring; improper voltage, electrical service, or electrical connections; or 
violation of applicable building, plumbing, or electrical codes, laws, ordinances, or regulations.

This limited warranty does not cover incidental, consequential, or secondary damages.

Any implied warranties on the product described in this limited warranty will not be effective
after the expiration of this limited warranty.

Some states do not allow limitations on how long an implied limited warranty lasts or the exclusion
or limitation of incidental or consequential damages, so the above limitations and exclusion
may not apply to you. This limited warranty gives you specifi c legal rights and you may also
have other rights which vary from state to state.

Содержание Sof-Tek





































Отзывы: