6
Adapt-a-Valve Installation - Part# 134007
Turn off the cold water supply to the faucet by turning the angle stop valve completely off.
Drain any water in the line by opening the faucet cold side handle.
Step 9
Step 10
Attach the adapt-a-valve as illustrated in the three photos above, choosing the configuration
that fits your plumbing. (When attaching the adapt-a-valve to straight pipe threads, use
Teflon tape on the threads without the rubber washer.)
Configuration for 3/8”
compression fittings
Configuration for 1/2”
compression fittings
Hot
Supply
Cold
Supply
Caution:
Water supply line to the system must be from the cold water supply line only.
Hot water will severely damage your system.
Insert the faucet shank through the hole in sink and let it rest on the sink top.
Place the escutcheon chrome plate and the black rubber washer on the faucet shank.
(Parts found in faucet parts bag).
From the underside of the sink slide on the locating washer, lock washer and brass nut
onto the shank. Check orientation of faucet then tighten brass nut securely.
Step 6
Step 7
Step 8
Faucet Installation
Plastic