background image

3

Visit our website at http://watt-age.globalhobby.com for information on other Wattage products

Thank you for purchasing the new Wattage Wild Cat 400 EP ARF.  Before completing the final assembly of your
new airplane, please carefully read through this instruction manual in its entirety.  Doing so will ensure your
success the first time around!

WATTAGE WILD CAT 400 EP ARF FEATURES

Compact, Aerobatic Design for Exciting Small-Field Flying

One-Piece Built-Up Wing, Balsa Tail Surfaces, Molded Fuselage, Cowling & Wheel Pants

Includes Wattage Super 400 Cobalt Motor and Composite Propeller

Covered with Real Iron-On Transparent Covering Material

Includes a Generous Hardware Package

Fast & Easy Assembly - Over 40 High Resolution Digital Photos & Drawings Guide You

This instruction manual is designed to guide you through the entire assembly process of your new airplane in the least
amount of time possible.  Along the way you'll learn how to properly assemble your new airplane and also learn tips
that will help you in the future.  We have listed some of our recommendations below.  Please read through them before
beginning assembly.

Please read through each step before beginning

assembly.  You should find the layout very complete
and straightforward.  Our goal is to guide you through
assembly without any of the headaches and hassles
that you might expect.

There are check boxes next to each procedure.  After

you complete a procedure, check off the box.  This will
help prevent you from losing your place.

Cover your work table with brown paper or a soft cloth,

both to protect the table and to protect the parts.

Keep a couple of small bowls or jars handy to put the

small parts in after you open the accessory bags.

We're all excited to get a new airplane in the air, but

take your time.  This will ensure you build a straight,
strong and great flying airplane.

If you come across this symbol 

,  it means that

this is an important point or an assembly hint.

If you should find a part missing or damaged, or have any questions about assembly,

please contact us at the address below:

Global Services

18480 Bandilier Circle

Fountain Valley CA  92708

Phone: (714) 963-0329          Fax: (714) 964-6236           Email: [email protected]

Visit our website at http://globalservices.globalhobby.com

To enable us to better serve your needs, please include your email address with any correspondence you send to us.
Your email address will be added to our Customer Service Database so you will automatically receive free updates
and tech notices for your particular product.  You will also receive repair status updates (if applicable) and other
important information about your product as it becomes available.

IMPORTANT INFORMATION ABOUT YOUR EMAIL ADDRESS

Global Hobby Distributors will not disclose the information it collects to outside parties.  Global Hobby Distributors does not sell,

trade, or rent your personal information to others . Your privacy is important to us.

INTRODUCTION

Содержание WILD CAT 400 EP

































Отзывы: