Battery Torque Wrench
User Manual
5
Chapter 4: Function Description
4.1 Work Interface
1
、
Torque value: it has different meanings according to mode selection. Mode 1
represents specific torque value, mode 2 represents gear value, and mode 3 represents
specific torque value
2
、
Working state: ready for shutdown, run for operation, run when the trigger is
pressed, and ready for other times
3
、
Unit: in mode 1, there are three units: nm, ft1bs and kgfm, in mode 2, grade
and in mode 3, nm
4
、
Mode: 1, 2 and 3 respectively
Note: this interface has the buzzer reminder function. During the working process,
the buzzer continuously rings for 4 times, and when it has exceeded the maximum
current, it should be shut down immediately; when the buzzer continuously rings for 3
times, it means that the current torque has exceeded the preset value, and it should be
shut down immediately; when the buzzer keeps ringing, the screen will display the low
power reminder, and the rotation speed of the torque wrench will be significantly
reduced, which means that the battery power is too low The operation shall be stopped
and the battery shall be replaced.
Keystroke operation
：
1
、
▲ key to increase the torque value, click the torque value + 1, hold for a little
10, hold for + 100
2
、
▼ key to reduce the torque value, click the torque value - 1, press and hold slightly
longer - 10, hold and hold - 100
3
、
● key to enter the main menu
Note: there are limits to the range of torque values