17
17
Battery Torque Wrench
User Manual
Push the switch in on the Right Side - This will cause the Digital Battery Torque to
operate in the forward (clockwise) direction. The tool status will be set as ready on the
display screen.
Push the switch in on the Left Side -This will cause the Digital Battery Torque to operate
in the Reverse (counter-clockwise) direction. The tool status will be set as reverse on
the display screen.
5.3.6 Installing the Reaction Arm
Ensure the reaction arm and snap ring are installed securely to hold the reaction arm
in place. Make sure the reaction arm is in contact with a solid contact point before you
operate the tool.
WARNING:
Keep your body parts clear of the reaction arm when the tool is in
operation.
5.3.7 Torque Operation
This section explains how to properly torque a bolt using the Digital Battery Torque
Torque Tool. This operation can be used in tool locked or unlocked mode.
WARNING:
The Digital Battery Torque should only be used on fasteners with a similar
joint rate as calibrated. From factory the tool is calibrated on joint rate of
10-15 degrees. If require to re-calibrate with the desired joint rate.
1) check that the corresponding target torque has been selected on the screen.
2) press the switch tightly, the switch can be released at any time to stop the tool and