18
18
Battery Torque Wrench
User Manual
cancel the torque cycle.
3) when "ready" is displayed on the screen, the tool is ready for the next torque.
4) when tightening, it shall be ensured that there is a tightening angle of more than
180 degrees. It is not allowed to directly continue tightening after tightening.
5.3.8 Safety device (switch lock)
The switch lock is used to move the tool from one direction to another. Starting it is to
prevent the switch on the electric torque wrench from being pushed. If you want to
start the switch lock, simply move the switch on the handle of the electric torque wrench
to the middle.
5.4 Brush replacement
When the motor is overheated, the equipment shall be shut down for a period of
time to avoid excessive loss of brush caused by overheat.
After half a year of use or frequent use, check the motor brush every month.
Otherwise, if the motor brush is used after the loss, it will cause damage to the motor
or other adverse conditions.