16
Relays Override
Touch Rotate
to Touch a Relay to toggle the
display the Local-Relays
relay ON and OFF
screen
Note that two pole relays will be controlled by the odd number, or first, relay position. The
even number position will be blank. For example, a two pole relay module installed in position
#1 on the DIN rail will be controlled by the relay #1 display. Relay #2 will be shown as a “---”
position on the screen.
Touch Rotate
to
bring up the Channels screen
There are three states of a channel depending on the states of assigned relays: ON, OFF and
MIX (when there is a mixture of ON and OFF relays).
The relays that are assigned can be toggled on and off. By default, the relays are assigned to
the channels on a one-to-one basis. That is, relay one to channel A, relay 2 to channel B, etc.
See the section on Assign Relays/Channel under Setup to change the default assignment of
relays to the channels. If channels are not assigned, a “---” will display.
Touch Rotate
to Touch the input number to
bring up the Inputs screen toggle the relay(s) programmed
to the input on and off
Home
02/07/11
20 : 12 : 40
MON
Sunrise 06:39
Sunset 17:24
DST
Local - Relays
[1] Off
[2] ---
[3] Off
[4] ---
[5] Off
[6] Off
[7] Off
[8] Off
Local - Channels
[A] Off
[B] Off
[C] Off
[D] Off
[E] Off
[F] Off
[G] Off
[H] Off
Local - Channels
[A] Off
[B] Off
[C] Off
[D] Off
[E] Off
[F] Off
[G] Off
[H] Off
Local - Input
[1] Off
[2] Off
[3] Off
[4] Off
[5] Off
[6] Off
[7] Off
[8] Off