Watt Drive V2500 Series, Руководство пользователя

Страница: 58 / 68

APPENDIX A: TECHNICAL SPECIFICATIONS
A-2
055T 075T 110T 150T 185T 220T 300T 370T 450T 550T 750T
5.5 7.5 11 15 18.5 22 30 37 45 55 75
7.5 10 15 20 25 30 40 50 60 75 100
9.9 13.7 18.3 24.4 28.9 34.3 45.7 55.6 69.3 84 114
13 18 24 32 38 45 60 73 91 110 150
Recommended 50 Hz 134S4 134M4 161M4 161L4 180M4 180L4 200L4 226S4 226M4 251M4 281S4
WATT motor *) 87/100Hz
101LA4
114M4 134S4 134M4 134ML4 161M4 161L4 180M4 180L4 200L4 226S4
14 19 25 32 39 49 60 63 90 130 160
Keypad
External
Signal
Keypad
External
Signal
W 200 200 200 250 250 250 370 370 370 425 425
Dimensions (mm) H 323 323 323 403.8 403.8 403.8 589 589 589 660 660
D 183.2 183.2 183.2 205.4 205.4 205.4 260 260 260 264 264
V2500-0wxyz_W1 size E E E F F F G G G H H
Weight kg 8 10 13 13 13 13 36 36 36 50 50
EMC-conformity
cable len.(2nd env.)
m 60 80 80 75 50 45 50 50 25 25 25
cable len.(1st env.) m 15 15 15 20 15 15 20 20 15 15 15
*) 4-pole motor - for details on motor type and data please refer to the current motor catalogue EUSAS'03
**) Max. Ambient Temp. is 50°C for size E (5.5kW to 11kW) and G (30kW to 45kW) inverters
optional external EMC-filter according to EN61800-3 amendment A11
Analog frequency/current signal output.
Altitude 1,000 m or lower, keep from corrosive gasses, liquid and dust
2
-10
o
C to 40
o
C (-10
o
C to 50
o
C without blind plate) Non-Condensing and not frozen
Fan-cooled
Self-testing, Over Voltage, Over Current, Under Voltage, Overload, Overheating,
External Fault, Electronic thermal, Ground Fault.
-20
o
C to 60
o
C
Below 90% RH (non-condensing)
Digital Inputs DI1 to DI6 can be combined to offer various modes of operation,
RS-485 serial interface (MODBUS).
Multi-step selection 0 to 15, Jog, accel/decel inhibit, first to forth accel/decel switches, counter,
PLC operation, external Base Block (NC, NO), etc.
AC Drive Operating, Frequency Attained, Non-zero, Base Block, Fault Indication, Local/Remote
indication, PLC Operation indication and Auxiliary Motor Output
9.80665m/s
2
(1G) less than 20Hz, 5.88m/s
2
(0.6G) at 20 to 50Hz
AVR, S-Curve, Over-Voltage, Over-Current Stall Prevention, Fault Records, Adjustable Carrier
Frequency, DC Braking, Braking Chopper (up to 11kW), Momentary Power Loss restart, Auto
Tuning, Frequency Limits, Parameter Lock/Reset, new Sensorless Vector Control, Counter,
PID Control, Fan & Pump Control, PLC, MODBUS Communication, Reverse Inhibition
Filter, Braking Resistor/Chopper, internal PG-Feedback for closed loop Vector Control,
Communication Modules for DeviceNet and ProfiBus DP (coming soon).
20 to 250%, Setting of Rated Current
Setting by
! "
Potentiometer-5K
Ω
/0.5W, DC 0 to +10V or -10 to +10V (Input impedance 47K
Ω
),
RS-485 interface, 4 to 20mA (Input impedance 250
Ω
),
Multi-Function Inputs 1 to 6 (16 steps, Jog, up/down)
Set by RUN, STOP and JOG
EMC
Input
Rating
Rated Input Current (A)
Rated Voltage
Frequency Tolerance
Control System
Output Frequency Resolution
Torque Characteristics
Overload Endurance
Protection
400/460V class (ff)
Proportional to Input Voltage
47 – 63 Hz
SPWM (Sinusoidal Pulse Width Modulation, carrier frequency 1-15kHz)
3-phase 342...528 Vac
Output
Ra
tin
g
Rated Output Capacity (kVA)
Rated Output Current (A)
Maximum Output Voltage (V)
Voltage Class
OPTI-line V2500-0
_ _ _ _
yW1
Max. Applicable Motor Output (kW)
Max. Applicable Motor Output (HP)
V/F Pattern
Accel/Decel Time
0.01Hz
Including auto-torque boost & auto-slip compensation;
starting torque up to 150% at 1.0Hz
150% of rated current for 1 minute
0.1 to 3600 seconds (4 Independent settings for Accel/Decel Time)
Adjustable V/F pattern (for different types load)
Stall Prevention Level
Oper
ating C
har
acter
istics
Frequency Setting
Operation Setting
Signal
Multi-Function Input Signal
Multi-Function Output Indication
Analog Output Signal
C
ontr
ol
C
har
acter
istics
Cooling Methods
Other Functions
Options
Vibration
Envir
omental
C
onditions
Installation Location
Pollution Degree
Ambient Temperature**)
Storage/ Transportation Temp.
Ambient Humidity