Watt Drive V2500 Series, Руководство пользователя

Страница: 33 / 68

5
5’-1
CHAPTER 5’ – QUICK START GUIDE
The parameters of the inverter drives V2500 are pre-set by factory to application based
values that usually occur in standard environment.
When following the Warnings in the Introduction of this manual and the storage and
installation guidelines in chapter 2 as well as the wiring notes in chapter 3, the start-up will
usually be executed in very short time because of the parameters factory settings.
Some parameters that maybe are still necessary to have an eye on are listed right here
below. The complete list of parameters for preparing the inverter for your special
applications’ requirements can be found in chapter 8 of this manual or – as a detailed
description - in the long version of the manual, available for download at
www.wattdrive.com.
Groupe 0: User Parameters
Para-
meter
Explanation Settings
Factory
Setting
Actual
Setting
00: V/F Control
01: V/F + PG Control (also see Pr.10-09
to 10-11)
02: Vector Control
00-09 Control Methods
03: PG Control (also see
Pr.10-09 to 10-11)
02
Groupe 1: Basic Parameters
01-00 Maximum Output Freq. (Fmax) 50.00 to 400.00 Hz 50.00
01-01 Maximum Voltage Frequency
(Base Freq) (Fbase)
0.10 to 400.00 Hz 50.00
230-V-Series: 0,1 V to 255,0 V 230,0
01-02 Maximum Output Voltage
(Vmax)
400/460-V-Series: 0,1 V to 510,0 V 400,0
01-09 Accel Time 1
!
0.01 to 3600.0 sec 10.0
01-10 Decel Time 1
!
0.01 to 3600.0 sec 10.0
Groupe 2: Operation Method Parameters
00: Digital keypad or Inc./Dec. Frequ.
01: 0 to +10Vdc from AVI
02: 4 to 20mA from ACI
03: -10 to +10Vdc from AUI
04: RS-485 communication interface
05: RS-485 communication interface. It
won’t memorize the frequency.
02-00 Source of First Frequency
Command
!
06: Combined usage of the master and
auxiliary frequency command
02-10, 02-11,02-12
01