Watlow RMA PLUS RMAP-2A Series, Руководство пользователя

Страница: 54 / 75

Version 1.0 PN: 2042-8198
Page 54 of 75 DN: 10-32813
27 0x1B Logic 20
28 0x1C Compare 20
36 0x24 Real Time Clock 1
45 0x2D LED 4
68 0x44 Standard Bus 2
69 0x45 Modbus 2 If RMAP-2AXX-XXXX
70 0x46 Ethernet 1
74 0x4A Alarm 2 10
75 0x4B Control Loop 2 4 If RMAP-8AXX-XXXX
100 0x64 Consumer Data 16
101 0x65 Module Limit 1 If RMAP-8AXX-XXXX
102 0x66 Volume 3
210 0xD2 Optic Sensing 4 If RMAP-8AXX-XXXX
211 0xD3 Calibration 4 If RMAP-8AXX-XXXX
Figure 51 - Standard objects
New objects and deviations from standard EZ-ZONE objects are documented below. Standard EZ-ZONE
object documentation may be found in the user manuals for the EZ-ZONE RM family or the EZ-ZONE
COMPOSER® software.
Device
Device member 13 , “Load Parameter Set , ” includes an additional enumeration for applying factory
defaults. You may now choose to restore factory defaults with or without communication objects (and
others). Choose the “Factory” option ( default level 0) to exclude the following objects: Assembly,
Calibration, Standard Bus, Ethernet, Modbus® and Real Time Clock. Choose the “Communications”
option to include the above objects (default level 1).
Device member 50 , “Command , ” is a special device command parameter. Writing the strings below will
result in the specified action.
Device member 51 , “Re -Config, ” will issue a re-config command to the RMA PLUS. This will bind all
object sources to their specified producers whether local or remote.
Device 1 (0x01), Instance 1
Member ID Member Name Data Type Access NV Min Max Default Comments / Description
13 0x0D Load Parameter Set ENUM16 RW 61 61: None
31: Factory
1234: Communications
50 0x32 Command STRING RW "" "" - Empty String
"reset" - Issue a soft reset (5 sec)
51 0x33 Re-Config ENUM16 RW 59 59: No
106: Yes
Real-Time Clock
The RMA PLUS implements a real-time clock (RTC) with battery backup. The primary use of the time is
for the file system. You may optionally synchronize the RTC by using the
SNTP client feature.
Key Features:
•
The RTC epoch begins 2000-01-01 00:00:00 UTC and ends 2135-12-31 23:59:59 UTC.
•
Supports time zone offset from UTC±00:00 (±12 hours, 15-minute increments).
•
If enabled and the RMA PLUS is powered-up, the RTC will automatically adjust the clock for Daylight
Saving Time (DST) following the currently established rules.