Watkins Wellness Freshwater Salt System, Руководство пользователя

Страница: 9 / 54

FreshWater Salt System
Page 7
English
4. System Test
The system status test shows you if the system is performing optimally. It reflects a number
of elements that can impact performance, including the salt level, cartridge status (clean/
dirty), and water temperature. The status automatically updates. You can manually update
the system status by activating the status test using your control panel. Table 4 lists system
status messages with meaning or action required.
Green - System is optimal.
Yellow OK - System is OK but should be monitored (see Troubleshooting on page 8).
Red LOW - The system needs your attention and is NOT generating chlorine. The
cartridge may be expired, or the salt level may be low (see Troubleshooting on page 8).
Red HIGH - The system needs your attention and is NOT generating chlorine. The salt
level is high (see Troubleshooting on page 9).
Status Message on Screen
(Actual Message may vary Depending on Spa)
Meaning or Action Required
Okay Operating normally
Inactive-System Off System Off
Output level is set to 0
System Testing System test initiated/in progress
24-Hour Boost Cycle On Increasing chlorine level
Output level is set to 10 for 24 hours
1. Dip Test Strip
2. Balance Water
3. Soften Water
4. Adjust Level & Confirm
5-Way Test Strip
10-day verification
Test water, adjust output level, confirm
Salt test strip
Inactive-Summer Timer On System is disabled for eight hours when
Summer Timer is active
Inactive-High Status
1. Dip Salt Strip
2. Check/Replace Cartridge
Non-operational
high salt
level detected -
correct salt level; check/replace cartridge
Inactive-Low Status
1. Dip Salt Strip/Clean Filter
2. Check/Replace Cartridge
Test water with salt test strips and add salt if
needed. Check/clean filter. Replace cartridge.
Cartridge Reached 4 Months
Replace Cartridge?
Replace cartridge now or postpone 7 days
Remove Cartridge Now Step 1 of cartridge change process
Insert New Cartridge Step 2 of cartridge change process
Press System Restart Step 3 of cartridge change process
Salt System Restarting… Step 4 of cartridge change process
Service Required Contact Dealer
Error #
Contact dealer for service
Table 4