2 Overall view of the installation
Your heat pump has been configured by your installer. It
is composed of the following main elements:
-The outdoor unit is positioned, as its name indicates,
outside your dwelling and extracts energy from the
outside air
-The hydraulic unit positioned in your boiler room, cellar,
garage or even your kitchen, transfers the energy to
the heating circuit (and the domestic hot water)
-The outdoor sensor detects the outdoor temperature
Optional equipment:
-Room thermostat
-Room control unit
Heat pumps are systems that can be connected to any
form of
low temperature heat distribution systems
:
the heat captured by the heat pump can therefore be
used in different ways:
-Floor-heating systems
-Radiators or fan coil heaters
-Domestic hot water (DHW)
figure 1 - Overall view of the configuration of a complete installation
Outdoor
sensor
Heating circuit
Floor heating system
Heating circuit
Radiators
DHW tank with electrical
back-up heating
Options
depending
on the system
configurations
DHW kit
The hydraulic unit
The outdoor unit
Control
options
or/and
or
Operation manual "1780 - EN"
- 5 -
Hydraulic indoor unit
Room thermostat
UTW-C55XA or
UTW-C58XD
Room control unit
UTW-C75XA or
UTW-C78XD
