2 9 5 Electrical connections
on the outdoor unit side
Access to the connection terminals.
- Remove the front panel. Remove the screws and the
front panel.
- Make the connections in accordance with the
diagram(s) (
figure 37, page 26
).
- Use cable clamps to prevent the conductors from
being disconnected accidentally.
- Fill in the space where the cables enter the outdoor
unit with the insulating plate.
Figure 31 -
Access to outdoor unit’s terminal block
Remove the screws
and push downwards
Front panel
Terminal
block
Figure 32 -
Finalisation of connection
to outdoor unit
Cable
clamps
Cables
(supply and
interconnection)
Front
Underneath
Lateral side
Back
Figure 33 -
Location of electrical cables and
refrigeration connections to outdoor unit
Figure 34 -
Connections to outdoor unit’s terminal block
1
INDOOR UNIT
POWER
2 3 L1 L2 L3 N
Terminal
block
Interconnection between
the outdoor unit and the
hydraulic unit
General electrical
supply
Installation and operating manual "1364 - EN"
Split system (3-phase)
- 26 -
