figure 24 - Access to outdoor unit’s
terminal block
2 10 5 Electrical connections
on the outdoor unit side
Access to the connection terminals:
•
Model Comfort 5, 6, 8
- Remove the cap
•
Model Comfort 10
- Remove the front panel.
- Remove the cap
Make the connections in accordance with the diagram
Use cable clamps to prevent the conductors from being
disconnected accidentally.
Fill in the space where the cables enter the outside unit
with the insulating plate
Remove the front panel
(2 screws)
Remove
the cap (1 screw)
figure 25 - Connections to outdoor unit’s terminal block
Terminal block
Interconnection between
the outdoor unit and
the hydraulic unit
General
electrical
supply
Remove the cap
(2 screws)
"
Model Comfort 5, 6 & 8
"
Model Comfort 10
Installation and operating manual "1532 - EN"
Air to Water Heat Pump
- 26 -
