WaterSoft ISOBAR II, Руководство по установке и эксплуатации

Страница: 13 / 28

13
Regeneration Cycle
Note
: Depending upon system pressure and other factors, it is possible to observe flow to drain in the rest cycle.
-
When the valve is between positions, the display will flash the number of the step it is moving towards.
-The default time at which regeneration will occur is 12:00 a.m.
The motor’s run direction during a particular regeneration cycle step is indicated by the rotation direction of the last 2 digit
displays.
Example:
5
-
Centuri Default Cycle Step Times Minutes
Step 1 Air Release (non-adjustable) 6
Step 2 Backwash 10
Step 3 Rest 5
Step 4 Air Replenish 20
Step 5 Rapid Rinse 5
Programming the Control Valve