Watersnake GPSmart, Руководство пользователя

Страница: 7 / 28

www.watersnake.com.au
7
GPS
MART
DEPLOYING THE UNIT
Loosen the depth adjustment collar and
slide it up the shaft to a position that will
give the desired motor depth. Firmly hand
tighten the adjustment knob to secure the
collar.
Step on the Tilt/Lock Lever and slide the
motor forward until the lower unit is clear of
the storage cradle.
Carefully tilt the unit forward and lower the
motor until the depth adjustment collar is
engaged with the steering bosses. The
Tilt/Lock Lever can be released as soon
as the motor begins to tilt. Once the unit is
fully deployed, verify that the lever has fully
returned to its up and locked position.
STOWING THE UNIT
Step on the Tilt/Lock Lever. Grasping the
head of the unit, pull it up and then back
until the lower unit rests securely in the
storage cradle. Release the Tilt/Lock Lever
and verify that it returns fully to its up and
locked position. Slide the depth adjustment
collar down until it is in contact with
the steering bosses, then very firmly hand
tighten the adjustment knob to secure the
unit. Done properly the unit cannot deploy.
Warning: Failure to secure the unit with the depth adjustment collar when
stowed can result in accidental deployment during extremely rough pounding
seas which will not be covered by the warranty.