Watersnake GPSmart, Руководство пользователя

Страница: 11 / 28

www.watersnake.com.au
11
GPS
MART
MODES OF OPERATION
POWERING UP THE MOTOR
The motor is able to function in Manual Mode immediately when powered up
and deployed. Anchor Mode and Track Mode will be will take 30 seconds before
it becomes available after it has received a GPS fix.
The motor will sound 1 “beep” to let you
know that it is powered up.
The motor will sound 4 rapid “beeps” to let you
know that it has acquired a GPS fix.
BATTERY LEVEL INDICATOR
Press and hold the off button on the remote fob for 5 seconds
to check the state of charge of the system batteries.
The motor will sound between one and five beeps which
indicates the amount of power still left in the battery.
5 beeps greater than 95% charge (greater than 25.20 volts)
4 beeps between 80% and 95% charge (between 24.84 volts and 25.20 volts)
3 beeps between 60% and 80% charge (between 24.40 volts and 24.84 volts)
2 beeps between 40% and 60% charge (between 23.80 volts and 24.40 volts)
1 beep between 20% and 40% charge (between 23.00 volts and 23.80 volts)
1 growl less than 20% charge (less than 23.00 volts)
This function will stop all thrust and steering operation and use the precision
voltage reference of the system to determine the battery’s remaining charge.
State of charge levels are based on voltage to charge references for ideal lead
acid batteries from leading battery manufacturers.
GPS accuracy will continue to improve for several minutes after being
powered up. It is suggested that you power up the GPSmart early
in the trip so that it will achieve maximum accuracy before being used.
The motor is equipped with a “Tilt” sensor that prevents the propeller from
running in the stowed position.