Watersnake GPSmart, Руководство пользователя

Страница: 17 / 28

www.watersnake.com.au
17
ROUTE MODE: RECALLING A STORED ROUTE
From any mode, while holding down the “M” or “T”
button, press and release the appropriate directional
button.
The motor will “beep a tune”
(multiple consecutive beeps)
to indicate that the route has
been successfully retrieved.
The motor will emit two “growls” and exit
if the memory location is empty or the
boat is not within 1 mile of a point on the route.
The motor will navigate directly to the nearest point on the route and then
travel to the most distant end, anchoring when it arrives. At any time while
retracing a route you can reverse the direction of travel by simply repeating the
same recall command. The motor will “beep a tune” to indicate that the boat is
arriving at the end of the recorded route.
When recalling a stored route if you hold the buttons too long you will
over-write that existing route memory location with the boat’s present
location, erasing it and begin recording a new route.
The motor will calculate a beeline to the nearest
point on the route. Make sure there are no obstructions
between you and the route prior to recalling it.
GPS
MART