Watersnake GPSmart, Руководство пользователя

Страница: 16 / 28

Watersnake
16
ROUTE MODE: STORING (OR OVER WRITING) A ROUTE
From any mode, while holding down the “M” or “T”
button,press and hold a directional button for 5
seconds. The buttons can then be released and
the motor will now be in the function corresponding
to the button you selected “M” or “T”.
The motor is now recording your route.
The motor will emit a 1 second “beep” to
indicate that the route is being recorded.
You can now navigate along your desired course,
switching at will between manual and track modes.
The recording will terminate when you press
“OFF” or “A”.
The motor will emit a 1 second “beep”
to indicate that the route has been
successfully saved.
Should you wish to record an anchor site using the “M” or “T” memory these
locations,simply hit “OFF” or “A” as soon as the path begins to record, thus
recording a path of zero length. A route can also be recorded at higher speeds
with the system in the stowed position. Simply use the route storing procedure
above and the system will accurately record your route at speeds of up to 60
knots. For safety, the thruster and steering motors will be disabled as long as
the system is in the stowed position.