Waters ACQUITY CM-30S Скачать руководство пользователя страница 129

Страница: 129 / 146

Warning symbols

October 7, 2014, 715004178 Rev. B

129

Specific warnings

The following warnings (both symbols and text) can appear in the user

manuals of particular instruments and devices and on labels affixed to them

or their component parts.

Burst warning

This warning applies to Waters instruments and devices fitted with

nonmetallic tubing.

Biohazard warning

The following warning applies to Waters instruments and devices that can

process material containing biohazards, which are substances that contain

biological agents capable of producing harmful effects in humans.

Warning:

To avoid injury from bursting, nonmetallic tubing, heed these

precautions when working in the vicinity of such tubing when it is

pressurized:
• Wear eye protection.
• Extinguish all nearby flames.
• Do not use tubing that is, or has been, stressed or kinked.
• Do not expose nonmetallic tubing to incompatible compounds like

tetrahydrofuran (THF) and nitric or sulfuric acids.

• Be aware that some compounds, like methylene chloride and

dimethyl sulfoxide, can cause nonmetallic tubing to swell,

significantly reducing the pressure at which the tubing can rupture.

Warning:

To avoid infection with potentially infectious, human-sourced

products, inactivated microorganisms, and other biological materials,

assume that all biological fluids that you handle are infectious.
Specific precautions appear in the latest edition of the US National

Institutes of Health (NIH) publication,

Biosafety in Microbiological and

Biomedical Laboratories

(BMBL).

Observe Good Laboratory Practice (GLP) at all times, particularly when

working with hazardous materials, and consult your the biohazard

safety representative for your organization regarding the proper use and

handling of infectious substances.

Содержание ACQUITY CM-30S


















































































































































Результаты поиска

Содержание ACQUITY CM-30S

Отзывы:

Waters ACQUITY CM-30S, Обзор и руководство по обслуживанию, Страница: 129 / 146

Результаты поиска

Содержание ACQUITY CM-30S

Отзывы: