38
|
46
Enabling the High-Pressure Discharge—Manual Handle
1
2
Use the illustrations and instructions to enable the
high-pressure discharge.
Note:
Make sure that you set the engine to idle
before you engage the high-pressure
discharge to avoid activating the external
pressure relief valve or the speed governor
system.
1 Position the handle to the right to enable the
high-pressure discharge.
2 Position the handle to the left to disable the
high-pressure discharge.
After operation, follow established procedures that
include:
•
Do not store the pump partially full. Completely
fill, or drain, the pump before storage.
•
Always drain the pump when freezing can occur.
NOTICE
Do not allow fluid in the
lines to freeze.
•
Remove all freezable fluid
from the lines before
storing the apparatus.
•
Freeze Damage
•
Disable the pump drive when placing the
apparatus into storage.
