Waterous CP-4, Инструкции по капитальному ремонту

Страница: 19 / 41

19 | 41
Safety Introduction Disassembly Assembly
Removing the Impeller Shaft Components
7
8
10
9
11
Use the illustrations and instructions to disassemble
the impeller shaft.
7 Use an arbor press to remove the wear rings
and impellers up to the packing housing.
Remove the key after removing the second
impeller.
8 Discard the gasket, then remove the packing
housing, packing rings, gland halves, and
hardware.
9 Remove the flinger ring.
10 Remove the hardware, bearing, driven gear,
bearing spacer, and key.
11 Remove the bearing housing.