WL2FL
User Manual
Page 11
–
Revision EU19-09-
2020
OPERATING INSTRUCTIONS
The above picture shows front LCD display and control panel for the
Waterlogic WL2FL
.
For Cold Water:
Press Cold Water Select Button followed by the Dispensing Button (within 3
seconds).
For Ambient Water: Press Ambient Water Select Button followed by the Dispensing Button (within
3 seconds).
For Hot Water:
Press Hot Water Select Button followed by the Dispensing Button (within 3
seconds).
NOTE:
Default selection mode is Cold Water. Selection will return to default after 3 seconds of
inactivity.
NOTE:
Selection indication light will turn Red when the Hot Water Select button is pressed, and will
switch back to the default green within 3 seconds after dispensing the hot water.
Temperature Indicator Light
