WL1000GF MAX
Manual
Page 21 Revision 10-7-2017
8.
Plug in the Power Cord.
9.
Make sure the hot and cold tanks are filled with water BEFORE turning on the Red
Heater and Compressor Power Switch
CAUTION!
NEVER TURN ON HEATER BEFORE FILLING HOT TANK.
Red Heater and Compressor Power Switch must be in the O=OFF position
while the Hot Tank is empty. Damage could occur within one minute and
the overheat (high limit) will require manual reset if heater is turned on
with an empty Hot Tank.
10.
Verify the cooler is fully operational before installing it at the customers’ site.
