9
2.7
Place a glass or large container under the
dispense area and touch the dispense button
to operate the unit, and touch again to stop the
appliance. Allow water to run through the unit
until the reservoir has been emptied. Refer to
section 5 in this manual for the button functions
Note:
Do not consume the water
until step
2.8
has been completed.
The first 3-5 litres of water dispensed may
contain some fine, black carbon particles.
Carbon is a natural, organic material made
from coconut shell, and is harmless to your
health. Clear water should be noticed after
flushing through 3 to 5 litres of water (2 to 3
full reservoirs). Do not allow the water level in
the reservoir to drop below the minimum fill
line, as when the reservoir is completely empty
the pump will begin to suck in air and make
bubbling noises
Note:
Should the machine fail or any of the
components fail, and the water in your area is
particularly hard, we recommend purchasing
a Waterlogic de-scaling kit and de-scaling
the unit
2.8
Repeat steps
2.4-2.7
three to four
times (3x - 4x). This will flush the carbon
from the new filter
2.9
Once step
2.8
has been completed
you can drink purified, healthy and safe
water from your appliance
During the first week of use and after
every filter change you may notice water
dripping out of the dispensing-nozzle
for several seconds after the unit has
stopped dispensing. This is normal,
and will stop after several days of use.
Note:
For a cold refreshing drink the
reservoir may be stored full of water
in the fridge
x3-4
Содержание F-FWEG1-M-A-NT Series
Страница 19: ......
