Safety
21.11.2015
7 / 76
Z20469
Copyright
2013 by: WATERKOTTE GmbH. Subject to changes.
Remove all objects and other materials that are not required for operation of
the heat pump from the work area of the heat pump.
1.2.3
Environmental protection
Observe the regulations regarding waste avoidance and proper waste recy-
cling or disposal when performing any kind of work on and with the heat
pump.
Ensure that particularly during installation and maintenance work, as well as
when placing out of operation, pollutants such as grease, oil, refrigerant, sol-
vent- containing cleaning fluids, etc. do not contaminate the ground or enter
the sewer system!
These materials must be collected, stored, transported and disposed of in
appropriate containers.
1.2.4
Modifications and repairs on the heat pump
For safety reasons, no unauthorised modifications shall be performed on the heat
pump.
Thus, all intended modifications are subject to written approval by
WATERKOTTE.
Use only original spare parts from WATERKOTTE.
Original spare parts are specially designed for your heat pump. Externally pro-
cured parts provide no guarantee that they are designed and manufactured in
compliance with relevant usage and safety requirements.
Parts and special equipment not delivered by WATERKOTTE are not approved for
use on the heat pump.
1.3
Hazards
Observe the following points to avoid life-threatening injuries and damages to the
heat pump during operation:
Warning! Risk of electric shock!
Do not use water or other liquids to clean the unit!
Keep all electrical supply units locked at all times!
Any work on the electrical equipment of the heat pump shall only be performed by
professional electricians!
Discharging refrigerant can cause severe personal injury (suffocation or hypother-
mia)!
Avoid contact with refrigerant!
Note the minimum volume of the installation room and consider the type of the re-
frigerant (EN 378-1).
