Components and installation
21.11.2015
14 / 76
Z20469
Copyright
2013 by: WATERKOTTE GmbH. Subject to changes.
4
Components and installation
4.1
Heating system EcoTouch Ai1 Geo
All components of the heating system are mounted in a protective steel plate
housing which is intended for installation inside. The base frame consists of a
bent, thick-walled sheet steel. Together with the rear panel frame, which also
consists of a thick-walled sheet steel, it forms a unit. Side panels, cover, front and
the tilt-mounted, ergonomic control panel can be removed.
All housing parts are optionally available in high-gloss white or stainless steel fin-
ish. Sound insulation ensures low noise emissions.
4.2
Structure
The EcoTouch Ai1 Geo series is a complete hot water heating system with inte-
grated central hot water supply, consisting of heat generator (heat pump), heat
source system, electrical heating element for start up and stand by, electrical con-
trol, domestic hot water tank made (not DS 5018) of stainless steel (204 l, insolat-
ed with integral foam), complete electrical and control engineering, touch display
with Easy-Con Software, smartphone control via Easy-Con Mobile software, diag-
nosis system.
All hydraulic connections are placed on the back side. All modules in the frame-
work are law vice fitted with removable, heat and sound insulated housing, color
signal white (RAL 9003) or stainless steel.
4.2.1
Heat pump module
The heat pump module includes the entire hydraulic technik.
The thermobox consisting of compressor and heat exchanger is enclosed and
includes a "Silenter" for vibration damping.
This ensures low operatioin noise of about 43 dB (A) - 45 dB (A), depending on
model.
For service purposes, the thermobox can be completely dismantled (see figure).
