Installation of heat pump and domestic hot water tank
21.11.2015
24 / 76
Z20469
Copyright
2013 by: WATERKOTTE GmbH. Subject to changes.
7.2.3
Assembly of the heat pump (EcoTouch Ai1 Geo)
Put the domestic hot water tank on the heat pump module in a way that steel pro-
files engage with each other and aligned the rear walls clean. Retain the construc-
tion at every steel profile and on the rear wall with the enclosed 16-lowing screws
(fillister head) (M8 self-locking, Z18595).
Note: To mount the tank module two people are needed. The tank module weighs
at least 65 kg.
Tip: To simplify installation, first install the screws on the rear panel.
Figure 7: Rear panel retained with screws (Pos. 1)
