LIGHTING
1.
Replace ashpan (item 31), close ash door (item 18), and make sure the ash
dump sliding door (item 26) is closed by pushing in ash dump lever (item 33a)
located at the bottom of the left side panel when looking from the front of stove.
2.
Open fuel loading door and open the primary air duct by sliding the primary air
control lever (item 32) located at the front ashtray (item 23) in towards the stove.
3.
Cover hearth with crumpled pieces of paper. Lay dry pieces of kindling approxi-
mately
1/2
” (12mm) x
1/2
” (12mm) x 20” (508mm) long on top of the paper
towards the back of the firebox. Ignite and close the fuel loading door.
4.
When the kindling has ignited, open the fuel loading door and add larger pieces
of dry wood. Close the fuel loading door.
5.
When a hot bed of coals is established add the normal fuel of well seasoned split
logs, which can have a maximum length of 20” (508mm).
6.
Once the logs are well lighted, adjust the primary air control lever (item 32) to
the required output.
Refuelling - Open the fuel loading door and carefully level the embers and re-load with
logs, close the fuel loading door.
15
Содержание Ashling
Страница 10: ...9...
