Waterfall Audio RS700, Инструкция по эксплуатации

Страница: 30 / 34

- 27 -
RATED POWER/4 OHMS/SINE WAVE 12 SECONDS
BOTH CHANNEL WORKING
NOMINAL OUTPUT IMPEDANCE
MIMIMUM OUT OUT IMPEDANCE (ON IMPEDANCE CURVE)
PEAK CURRENT (AMP PROTECTION THRESHOLD )
FREQUENCY RESPONSE IN « SPEAKER » MODE
PHASE PHASE ROTATION IN « SPEAKER » MODE
FREQUENCY RESPONSE IN « SUB » MODE
DISTORTION THD+N AT RATED POWER
DAMPING FACTOR (1 KHZ / 4 OHMS)
A TO D/D TO A CONVERSION « PREMIUM »
DSP TECHNOLOGY
SAMPLING FREQUENCY
LATENCY (INCLUSIVE OF DSP)
SIGNAL-TO-NOISE RATIO
CROSSTALK (1 KHZ @ RATED POWER)
MAXIMUM INPUT LEVEL (RCA - XLR)
MAXIMUM OUTPUT LEVEL (XLR)
INPUT IMPEDANCE
OUTPUT IMPEDANCE (XLR)
MAXIMUM GAIN (DEPENDING ON INTERNAL SWITCH 0 OR +15DB)
ACTIVE EXCURSION CONTROL («SUB» MODE ONLY)
LIMITER « SOFT CLIPPING » («SUB» & «SPEAKER» MODE)
AMPLIFIER THERMAL PROTECTION
(POWER STAGE, «SUB» & «SPEAKER» MODE)
THERMAL PROTECTION ENCLOSURES
(LOUDSPEAKER MOVING COILS, «SUB» & «SPEAKER» MODE)
SUB BASS EXTENSION PROCESSING («SUB» MODE ONLY)
CINEMA SCREEN COMPENSATION («SPEAKER» MODE ONLY)
AVAILABLE FILTERS «SPEAKER» MODE (SETTINGS DEPENDANT)
AVAILABLE FILTERS «SUB» MODE (SETTINGS DEPENDANT)
PROPRIETARY S/PDIF DIGITAL LINK
INDICATOR LEDS
COOLING & REGULATION
AMBIENT TEMPERATURE OPERATING RANGE
SHORT CIRCUIT PROTECTION
TRIGGER VOLTAGE (MONO JACK 3.5MM)
INPUT VOLTAGE
POWER CONSUMPTION
ACCESSORIES INCLUDED
DIMENSIONS (W x H x D) (H= 2U)
WEIGHT
SPECIFICATIONS
2 x 700 W RMS
4 - 16 Ohms
3 Ohms
2 x 30 A
2 Hz - 45 kHz (-3dB)
2° @ 30 kHz
2 Hz à 35-150 Hz (regl. 12 or 24 dB/oct) or 2 - 350 Hz (LFE) / (-3dB)
∞
TO 0.06%
> 1000
2 inputs / 4 differential outputs - 32-bit
32 bits - 295 MHz Sigma DSP
96 kHz - 24-bit audio resolution
1.95 ms
110 dB
< - 95 dB
+22 dBu (XLR inputs on INA type differential audio receiver)
+16 dBu (5Vrms-diff.) max / U-GUARD™
XLR : 18 kOhms/2 (com) - 36 kOhms (diff) - RCA ; 21 kOhms
480 Ohms/2 (com) - 960 Ohms (diff)
29.8 dB / 44.8 dB
X-GUARD™ Processing
U-GUARD™ Processing
T-GUARD™ Processing
Level drop of 15 dB with auto reset after 20 sec
T-GUARD™ Processing- Power and duration according to parameters.
Level drop of 15 dB with auto reset after 20 sec
X-TEND™ Processing
Response extension up to 20 Hz (SUB600S only)
Processing CSC™
Progressive correction of frequency response (1 - 20 kHz band )
High pass 80/100/120 Hz - 12 or 24 dB / oct on speaker
Adjustable low pass 35 to 150 Hz - 12 or 24 dB / oct on XLR outputs
Low pass adjustable 35 to 150 Hz - 12 or 24 dB / oct on speaker outputs
High pass 100 Hz - 12 or 24 dB / oct on XLR outputs
S/PDIF IN & OUT via RCA 75 Ohms / 96 kHz - 24 Bit resolution
2 blue leds : Powered On
2 red leds : U-GUARD™ and T-GUARD™
2 green leds : X-GUARD™
2 «low noise » fans - 2500 RPM
Triggering at approx. 2 x 40W RMS @ 22°C (Ambient Temp.) 5° - 40°C
5° - 40°C
Yes
12V DC
(auto) 100 - 240V / 50 - 60 Hz
Switched off in trigger control (standby): 400 mW
Mute (amp off): 14W / Rest: 36W / Maximum peak: 2300W
2 rack mount adapters / 4 hemi-sperical feet
1 power cord 3 x 1.5² - 16 A Length : 1,5 m
482 x 88 x 348 mm (rack) - 450 x 88 x 348 mm (standard)
8.7 Kg