LED FIBREGLASS NICHE POOL LIGHT INTRODUCTION
The Waterco LED Niche fiberglass pool light has been specifically designed for easy installation
into fibreglass pools. Features include the following:
• Flush mounted with a minimal 28mm projection into pool.
• Super bright LED’s capable of delivering 352 lumens (White LED).
• 180° illumination.
• Operates on only 15% of the electrical power of a halogen light.
Available in multicoloured RGB, blue and white models.
LED FIBREGLASS NICHE POOL LIGHT SPECIFICATIONS
Note:
Specification size in Millimeters (mm).
• Ensure all pool lights are installed by a suitably qualified persons (e.g. registered pool builder and/or
qualified electrician), in accordance with AS/NZS 3000:2007 standards.
• This pool light is supplied with a 20m power cable and should not be modified. Cutting an underwater
section of power cable will void the warranty unless done so in conjunction with the underwater light
replacement kit.
• The pool light must be installed not more than 600mm below top of coping, to allow for removal from
pool for servicing.
• The recommended length of power cable that is stored within the light niche is 1m. This enables easy
access without the need for entering the pool water.
• Ensure the light is submerged in water before switching on, to avoid overheating.
• Surrounding area has to be clear and unencumbered to allow for adequate space to service the light.
• When switched off, the light should be left to cool for two minutes before switching on again.
Caution
165
197.3
28
144
60
169.3
2
