background image

 

15 

 

WARRANTY STATEMENT 

 
BW Solar warrants that, subject to the limitations outlined below, the product will, with normal use, 
and within the original operating specifications, be free from faulty parts, manufacture or 

workmanship during the warranty periods relevant to the products stated below 
 

 

Waterboy

 Solar Water Pump Range - no more than 24 months 

 

Waterboy 

Solar Module Array Frame Range - no more than 24 months 

 

All other Products, including actuators, A/C water pumps and controllers   - no more than 12 
months 

 
 

* PLEASE NOTE:  ANY DISASSEMBLY or MODIFICATION WHATSOEVER OF THE PRODUCT VOIDS ALL 

WARRANTY. * 

 
 

1. Warranty Limitations  

 

This warranty is limited to the quality and performance of the products provided, BW Solar shall have 
no responsibility or liability whatsoever for damages or injury to persons or property, initial or 
consequential, or for any other losses (including lost profits) resulting from any cause whatsoever 

arising out of or relating to the installation or commissioning of any product sold.  
 

This warranty does not cover products altered, modified or used in ANY WAY not authorized in 
writing by BW Solar. 
 

2. Warranty Performance 

 

This limited warranty is applicable only to Customers who have purchased the above products directly 
from BW Solar or from an authorized agent of BW Solar. To qualify for this warranty adequate 

documentation must be presented to prove that the product was purchased from BW Solar or their 
authorized Agent. 
  

For any claims relating to the 

WATERBOY

 

Solar Pump

 range, a 

SYSTEM REPORT FORM

 must be 

returned to BW Solar within 1 Month of the products installation, failure to do so will void this 

warranty. 
  
Returned products shall become the property of BW Solar. BW Solar shall have the right to deliver a 

different type of product (performing to the same or better operational functionality as the returned 
product) if an identical replacement is deemed no longer available or suitable. 

 
 

 

Содержание MINI ARRAY

















Отзывы: