Waterboy MINI ARRAY, Руководство по установке

Страница: 11 / 16

11
Rails
Extending Rails
(If not extending, skip this section)
•
Insert the rail joiner into the side channel of one rail and tighten with half the joiner
exposed.
•
Slide the second rail onto the joiner and tighten
Note: rail joiner may be longer than the one shown.
Attaching rails top and bottom
Insert 2x rail clamps in the holes at the bottom of the mounting plate, place the rail on the beam and
place 2x rail clamps in the holes at the top of the mounting plate.
Ensure the mid- point of the rail is centre to the beam before tightening
(see picture below).