background image

LIMITED LIFETIME WARRANTY

WaterTech Industries Residential

Water Tech Industries (WTI) hereby warrants said equipment, 

only to the original purchaser at the original 

installation location.
THIS WARRANTY PERIOD BEGINS

 at the time of initial installation and use. The warranty becomes 

valid upon 

registration of the equipment.

GENERAL PARAMETERS —

 This warranty applies only to systems installed on 

USA OR CANADIAN 

residential, municipal (city water) water supplies 

that meet US Environmental Protection Agency MCL 

standards (or similar).  REIONATOR PRO® products installed outside these parameters, will have the Standard Product 
Warranty rather than the Limited Lifetime Warranty applied – see website watertech.com for details.

LIMITED LIFETIME WARRANTY ON CONDITIONER AND BRINE TANK —

 Water Tech Industries will 

replace or repair (at WTI option) any conditioner tank OR brine tank that becomes unusable because of leakage, corrosion or 
rupture due to manufacturers defect . All internal mechanical components are warranted for a 

period of five (5) years 

from date of installation.

LIMITED LIFETIME WARRANTY ON RESIN — 

The REIONATOR PRO® has been equipped with the highest quality 

water treatment media (certified to NSF Standards).  If, upon factory inspection, the resin is found to be defective, Water 
Tech Industries will furnish replacement resin.  The resin warranty does not cover resins subjected to water containing 
greater than 3.0-ppm of free chlorine or chloramines or containing greater than 1.0-ppm total Iron and/or Manganese.  Resin 
which has been fouled by iron, manganese, organics (or other contaminants not designed for treatment by the REIONATOR 
PRO®) is not covered.

LIMITED LIFETIME WARRANTY ON CONTROL VALVE —

 The REIONATOR PRO® has been equipped with the 

highest quality water conditioning control valve available.  If, upon factory inspection, the control valve body or PC board is 
found to be defective, Water Tech Industries will furnish repair or replacement (at WTI option) of the control valve body 
and/or the PC board.  All internal mechanical components are warranted from manufacturers defect for a period of five (5) 
years from the date of installation.

EXCLUSIONS AND LIMITATION OF LIABILITY —

 Water Tech Industries' liability for special, incidental, or 

consequential damages is expressly disclaimed. In no event shall Water Tech Industries' liability exceed the obligation of 
repairing or replacing any part that becomes defective under valid warranty coverage as described above. Cosmetic damage 
that does not affect the process functionality of the equipment is not covered. Water Tech Industries makes every effort to 
ensure that all illustrations and specifications are correct. However, these do not imply a warranty that the product is 

merchantable or fit for a particular purpose, or that the product may not vary from the illustrations and 
specifications.

The warranty contained herein is in lieu of all other warranties, expressed or inferred, including any implied 
warranty of fitness for a particular purpose. Labor and transportation costs incidental to the delivery or 
replacement of parts other than WTI factory repairs are not covered under this warranty. In the event of a 
warranty replacement or repair, WTI will cover the cost of shipping the covered components. This warranty 
expressly excludes any system which has been damaged by accident, fire, flood, Act of God, abuse, neglect, 
freezing, excessive temperature (below 40° F or above 110° F.), inappropriate pressure (below 20 psi or above 
100 psi), misuse, alteration of product in any way by owner or installing company, product identification 
tampering, misapplication, installation or operation not consistent with WTI instructions and installation outside 
of applicable plumbing codes and local regulations.  Furthermore, this warranty expressly excludes any system 
which has been out of service for more than 90 days continuously.  Fulfillment of the warranty coverage by WTI 
is contingent on proper execution of the procedures set forth in the WTI Warranty RGA policy.  No person or 
representative is authorized to assume for Water Tech Industries any liability on its behalf, or in its name, except 
to refer the purchaser to this warranty.  This warranty gives you specific legal rights, you may also have other 
rights which vary from state to state.

WHAT MUST YOU DO TO OBTAIN WARRANTY SERVICE —

 

The warranty registration 

(via phone or website) must be completed within ninety (90) days of installation to 
validate the REIONATOR PRO

®

 Limited Lifetime Warranty.

  Units that have not been registered 

will be covered under the Standard 5/10 Year Product Warranty rather than the Limited Lifetime Warranty.  
Repair work MUST be performed by an authorized Water Tech Dealer.  In the event that authorized dealer 
service is not available, defective components may be returned directly to Water Tech Industries with prior 
approval for warranty service. The registered owner must contact Water Tech for return instructions and return 
the defective component, freight prepaid, with proof-of-purchase, within the applicable warranty period.

Applicable to REIONATOR PRO

®

 Models: Pro Series: RX10, RX12, RX13, RXF10

Содержание Reionator Pro RX10

















Отзывы: