Water Tec WT1, Руководство по эксплуатации

Страница: 41 / 43

WT-Terms and conditions
Pool Care and maintenance.
You should avoid damage to the lamp by keeping the water at a neutral PH-value. Also the
water should be free from metal attacking ingredients to avoid discolouration any material
deposits on the lamp must be removed with a suitable non metallic cleaner.
The lamp must not come into contact with any metal effecting cleaners, or acids. Do not use
high pressure cleaners directly onto the lamp.
Installation
The Installation of the lamp must be carried out according to the instructions supplied. If any
modifications are made to the lamp, the manufacture is discharged from any liability. This
includes modifications to the cables; they should not be cut or re-joined. The cables are
supplied with the correct lengths specified. If any problems arise after installation by your
chosen installer and it is found that the fault was of poor installation the manufacture is
discharged from any liability.
The Company accepts no responsibility for any direct or indirect damage as a result, of poor
installation.
If the Buyer is overdue in payment for the goods or other goods supplied by the
Company, the Company may recover and sell the goods.
If you are not using the WT niche fitting, the manufactures is discharged from any liability.
The lamp is equipped with cable lengths requested; the installer must ensure suitable draw
wires are installed through the niche/pipe work and conduit.