Water Tec WT1, Руководство по эксплуатации

Страница: 22 / 43

WT-Lamp
24V DC Supply
Make sure the terminals are protected against corrosion and they are water tight.
WT-Lamp
Joining connections
MAS Electronics UK Ltd
DRG No: 00013
Tel 01235 536616
Date 01-01-13
WT
Lamp
1. Cut cable and strip back black
insulation. The 3 exposed
wires can then be joined using
the heat shrink crimps. Strip
the end of each cable to
expose the copper cable place
the cable into the crimp, using
a crimping tool crimp the end.
Once all cable have been
joined heat shrink the crimps
2. Place the heat shrink tube
over the crimped cable and
also over the black insulation
3. Put silicon sealant into the end
of the heat shrink tube then heat
shrink the tube to cover the cable
ends, this will prevent water
being pulled up through the
cable to the lamp.